 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TC7MBL3257AFK TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7MBL3257AFK Quad 1-of-2 Multiplexer/Demultiplexer The TC7MBL3257AFK is high-speed CMOS quad 1-2 multiplexer/demultiplexer. The low on resistance of the switch allows connections to be made with minimal propagation delay time. This device consists of four individual two-inputs multiplexer/demultiplexer with common select input (S) and output enable (OE). The A inputs is connected to the B1 or B2 outputs determined by the combination both the select input (S) and output enable (OE). When the output enable (OE) input is held "H" level, the switches are open with regardless the state of select inputs and a high-impedance state exists between the switches. All inputs are equipped with protection circuits against static discharge. Weight: 0.02 g (typ.) Features * * * * * * Operating voltage: VCC = 2.0~3.6 V High speed: tpd = 0.31ns (max.) @ VCC =3.0V Low on resistance: RON = 5 (typ.) @ VCC =3.0V ESD performance: Machine model 200 V Human body model 2000 V Package: VSSOP (US16) Pin compatible with the 74xx257 type. Pin Assignment (top view) S 1B1 1B2 1A 2B1 2B2 2A GND 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC OE 4B1 4B2 4A 3B1 3B2 3A 1 2007-10-19 TC7MBL3257AFK Truth Table Inputs OE L L H S L H X Function A port = B1 port A port = B2 port Disconnect System Diagram 1A 4 2 1B1 3 1B2 2A 7 5 2B1 6 2B2 3A 9 11 3B1 10 3B2 4A 12 14 4B1 13 4B2 S 1 OE 15 2 2007-10-19 TC7MBL3257AFK Absolute Maximum Ratings (Note) Characteristics Power supply range DC input voltage DC switch voltage Input diode current Continuous channel current Power dissipation DC VCC/GND current Storage temperature Symbol VCC VIN VS IIK IS PD ICC/IGND Tstg Rating -0.5~4.6 -0.5~4.6 -0.5~Vcc+0.5 -50 128 180 100 -65~150 Unit V V V mA mA mW mA C Note: Exceeding any of the absolute maximum ratings, even briefly, may lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Operating Ranges (Note) Characteristics Supply voltage Input voltage Switch voltage Operating temperature Input rise and fall time Symbol VCC VIN VS Topr dt/dv Rating 2.0~3.6 0~3.6 0~Vcc -40~85 0~10 Unit V V V C ns/V Note: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND. Electrical Characteristics DC Characteristics (Ta = -40~85C) Characteristics "H" level Input voltage "L" level Input leakage current ( OE , S) VIL 2.0 to 3.6 Symbol VIH Test Condition VCC (V) 2.0 to 3.6 Min 0.7 x VCC Typ. Max 0.3 x VCC 1.0 1.0 1.0 V Unit IIN IOFF ISZ VIN = 0~3.6 V 2.0 to 3.6 0 2.0 to 3.6 (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) 3.0 3.0 3.0 2.3 2.3 3.6 A A A Power off leakage current Off-state leakage current (switch off) OE = 0~3.6 V A, B = 0~VCC, OE = VCC VIS = 0 V, IIS = 30 mA 5 5 6 6 6 7 9 15 10 15 10 A ON resistance (Note 2) VIS = 3.0 V, IIS = 30 mA RON VIS = 2.4 V, IIS = 15 mA VIS = 0 V, IIS = 24 mA VIS = 2.3 V, IIS = 24 mA ICC VIN = VCC or GND, IOUT = 0 Increase in ICC per input Note 1: All typical values are at Ta = 25C. Note 2: Measured by the voltage drop between A and B pins at the indicated current through the switch. ON resistance is determined by the lower of the voltages on the two (A or B) pins. 3 2007-10-19 TC7MBL3257AFK AC Characteristics (Ta = -40~85C) Characteristics Propagation delay time (bus to bus) Propagation delay time (S to bus) Output enable time ( OE to bus) Output enable time (S to bus) Output disable time ( OE to bus) Output disable time (S to bus) Symbol tpLH tpHL tpLH tpHL tpZL tpZH tpZL tpZH tpLZ tpHZ tpLZ tpHZ Test Condition VCC (V) (Note) 3.3 0.3 2.5 0.2 3.3 0.3 2.5 0.2 3.3 0.3 2.5 0.2 3.3 0.3 2.5 0.2 3.3 0.3 2.5 0.2 3.3 0.3 2.5 0.2 Min Max 0.31 0.52 11.0 17.0 11.0 17.0 20.0 22.0 20.0 22.0 20.0 22.0 Unit Figure 1, Figure 2 ns Figure 1, Figure 2 ns Figure 1, Figure 3 ns Figure 1, Figure 3 ns Figure 1, Figure 3 ns Figure 1, Figure 3 ns Note: This parameter is guaranteed by design but is not tested. The bus switch contributes no propagation delay other than the RC delay of the typical on resistance of the switch and the 50 pF load capacitance, when driven by an ideal voltage the source (zero output impedance). Capacitive Characteristics (Ta = 25C) Characteristics Control pin input capacitance ( OE , S) Switch terminal capacitance (B1~2) Switch terminal capacitance (A) Symbol CIN CI/O CI/O OE = VCC Test Condition (Note) (Note) (Note) Typ. 3 15 26 Unit pF pF pF VCC (V) 3.0 3.0 3.0 OE = VCC Note: This parameter is guaranteed by design. 4 2007-10-19 TC7MBL3257AFK AC Test Circuit Open 2 x VCC GND Measure CL = 50 pF RL = 500 CL RL Switch RL Parameter tpLH, tpHL tpLZ, tpZL tpHZ, tpZH Switch Open 2 x VCC GND Output Figure 1 AC Waveform tr 2.5 ns Input (A, B) tf 2.5 ns 90% 50% 10% VCC GND VOH 50% tpLH tpHL VOL Output (B, A) Figure 2 tpLH, tpHL tr 2.5 ns Output Enable ( OE ) tpLZ Output (A, B) Low to Off to Low tpHZ Output (A, B) High to Off to High Outputs enabled 90% tf 2.5 ns 90% 50% 10% tpZL VOH 50% 10% tpZH VOL VOH 50% VOL Outputs disabled Outputs enabled VCC GND Figure 3 tpLZ, tpHZ, tpZL, tpZH 5 2007-10-19 TC7MBL3257AFK Package Dimensions Weight: 0.02 g (typ.) 6 2007-10-19 TC7MBL3257AFK RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN GENERAL * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 7 2007-10-19 |
Price & Availability of TC7MBL3257AFK
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |